RenderSmith v1.2.1

Fixed:
- Freeze preserves comp comments, including when recovering layers after an
  interrupted bake.
- Unfreeze keeps originally disabled layers disabled and restores solo states.
- Freeze reports blend modes accurately. A selection that mixes different modes
  is reported as mixed whatever order the layers are in, and a mode that will be
  carried to the frozen layer is named in the dialog. Previously every
  non-normal mode shared one internal label, so Add mixed with Multiply was
  described as a single mode that would be carried over -- and then was not.
- Freeze is disabled while rendering. Repeated starts are blocked throughout
  preparation and per-layer baking, and completion, failure or abort releases
  the operation so Freeze can be used again.
- Frame Export writes true straight alpha in PNG, WebP and TIFF. Soft edges,
  shadows, glows and layers below 100% opacity no longer pick up the comp
  background colour or come out darker than they should.
- Frame Export JPG matches the Composition panel: transparent areas are filled
  with the comp background colour instead of black.
- Frame Export in 32 bpc projects is no longer about ten times too dark.
- The folder Browse buttons (Proxy, PreRender, Backup and Frame Export) now
  open the panel's own folder dialog. The previous dialog belonged to After
  Effects and disabled it while open, so when it opened behind the After
  Effects window the app could look frozen.

Improved:
- Frame Export asks what to do when the comp is set to a reduced resolution
  (Half, Third, ...): export at Full resolution, or as it is. The comp's own
  resolution setting is left unchanged either way.

RenderSmith v1.2.0

New:
- Render path: RenderSmith now chooses between aerender and After Effects'
  own render queue per job, based on what it has measured -- the handoff cost
  for your project, and the render speed of the comp you are rendering.
  Starting aerender means saving the project and reopening it in a second
  After Effects; on an 85 MB project that cost about two minutes before the
  first frame -- the same fixed cost for one frame or a thousand. The in-app
  queue skips it entirely. The first render of a project still goes to
  aerender and is timed; from the second render on, RenderSmith routes each
  job to whichever will finish sooner (ties go to aerender). One-frame jobs
  (Still Freeze) and comps handled by Render Quality Guard always use the
  in-app queue.
- Freeze: turn the selected layers into a still at the current frame. They are
  rendered as they look right now, the result takes their place as an [ST]
  layer, and the originals are switched off rather than deleted -- Unfreeze in
  the STILL manager brings them back. Before baking, RenderSmith names what it
  found in the selection that changes over time or depends on context
  (keyframes, expressions, time remapping, video sources, blend modes,
  adjustment layers). It warns; it never decides for you.
- With more than one layer selected, Freeze asks how to treat them. Left
  unticked (the default) the selection is flattened into a single baked layer:
  one render, and the group becomes one thing. Tick "Bake each layer
  separately" and every layer is baked on its own instead -- each keeps its own
  blend mode and its own position in the stack, so the result composites
  exactly like the original. That is the choice when the selected layers do not
  all share one blend mode, since a combined bake can carry only one. It costs
  one render per layer, and the checkbox says how many. The setting applies to
  both buttons, so a clip bake can be per-layer too.
- Clip Freeze: for a selection that moves, bake the work area as a clip
  instead of a single frame. The management table shows the frame range a clip
  was baked from (e.g. "clip 30-60"), and the tooltip shows the current work
  area when it has moved since. Layers left hidden by an interrupted freeze
  can be restored from the record RenderSmith keeps on the comp.
- Frozen layers get a "source changed" badge, like the "changed" badge on
  pre-rendered comps. It watches only the layers you froze (name, effect
  count, keyframes, expressions, time remap, footage, in/out, blend mode), so
  it stays fast and is not triggered by edits elsewhere in the comp. The eye
  switch is deliberately not part of it -- Freeze itself turns the source
  layer off.
- Project settings are written to .rendersmith/config.json by allowlist: only
  keys classified as project data (output folders, render-path preference,
  relink records, notification on/off switches) reach the project folder.
  Credentials, personal absolute paths and user identifiers stay in your user
  folder. v1.1 removed the known credential keys by name; the allowlist closes
  the whole category, so a future setting cannot reopen the hole.

Improved:
- Freeze and Clip bake take an Auto Backup only on the path that actually
  saves your project to disk (aerender). A one-frame Still Freeze runs in the
  in-app queue, touches nothing on disk, and therefore starts immediately
  without a backup.

Fixed:
- Re-rendering a pre-render could leave After Effects showing the old frames
  -- usually as a black or plainly outdated comp -- even though the new file
  written to disk was correct. Those frames live in AE's disk cache, which no
  script can clear and which survives restarting AE. RenderSmith now renders
  to a new file name instead of writing over the file the project already has
  imported, so there is no stale state left to inherit. The same change
  removes two long-standing Windows problems: the ProRes "Compressed size
  truncated" error when importing a file that had just been overwritten, and
  the failure when a second re-render started before AE released the previous
  file. A first pre-render still gets the familiar "<comp>_prerender.mov"
  name, and the previous file is archived exactly as before.
- Final Render set to detach pre-renders could disable the wrong layer in a
  comp that composites other pre-rendered comps. The layer was identified by
  its "[PR] " name prefix and the topmost match won, so layer order decided
  which one was switched off -- the comp's own pre-render could stay on while
  a nested one was dropped from the render. RenderSmith now identifies a
  comp's own pre-render by the footage it references. Where there is no
  record to check against, a single unambiguous "[PR] " layer is still used;
  several are left alone rather than guessed at.
- Change detection: a pre-rendered comp could show the "changed" badge just
  because the playhead was not at frame 0. Properties without keyframes but
  with an expression were read at the current time; they are now read at
  time 0, so the fingerprint no longer depends on where you parked the
  playhead.
- Change detection: a pre-rendered comp could show the "changed" badge even
  though you had not edited it -- reopening the project was enough to trigger
  it. Some effect parameters (the separator rows inside an effect, which carry
  no value of their own) are reported inconsistently by After Effects from one
  read to the next, and that inconsistency reached the fingerprint.
  RenderSmith now decides from the parameter's declared type instead, so an
  untouched comp always produces the same fingerprint.

  Note: a comp whose fingerprint was recorded by an earlier version may still
  show "changed" after you update. The material itself is fine -- the stored
  value was simply captured with the old, unstable reading. Re-rendering that
  comp once records a correct fingerprint and the badge clears for good.

RenderSmith v1.1.0

New:
- Frame Export: save the current frame as PNG / JPG / WebP / TIFF in one click
  with the new "Frame" button in the Lightweight row. Pick formats, quality and
  destination in Settings > Frame Export. Existing files are never overwritten
  by default -- repeated exports create _v02, _v03, ...
- Live output size: while rendering, the panel shows the output file growing
  next to the progress (e.g. "121.0 MB"), so heavy frames with quiet logs no
  longer look like a freeze.
- Link Watch: if pre-rendered layers lose their link (typically after an Undo),
  RenderSmith warns you once instead of failing silently later. The Relink
  button now also shows when that material was rendered, so you know exactly
  what you are restoring.

Improved:
- Change detection v2 for pre-rendered comps: fingerprints now cover effect
  parameters and precomp contents, so edits the previous version could not see
  now correctly show the "changed" badge. Existing projects migrate safely --
  nothing is flagged just because you updated RenderSmith.
- Freeze detection v2: a running render is watched through three independent
  signals (log output, output-file growth, render-process CPU), which
  eliminates false hang warnings on heavy frames. A warning is shown at 80% of
  the timeout, and changing the Hang Detection setting now takes effect
  mid-render.
- Render results: a render that completes with non-fatal AE warnings is now
  treated as completed -- the output file is verified, the material is linked,
  and the warnings are shown and kept in the history (previously such renders
  could be discarded as failures). Real failures are unchanged.
- Footage imported by RenderSmith is now named "[PR] <comp>" and labeled green
  in the Project panel, so it is never confused with your own footage.
- When a render fails because an effect could not be loaded (common right
  after switching AE versions), the message now says so and suggests checking
  that the plugin is installed for that AE version.

Security:
- Notification credentials (SMTP password, webhook URLs, bot tokens) are no
  longer written into each project's .rendersmith/config.json. Earlier
  versions copied them into every project folder RenderSmith opened. They are
  now kept only in your user folder and shared across projects.
- Projects created by earlier versions are cleaned automatically the next time
  you open them in RenderSmith. Your settings are unchanged and notifications
  keep working -- only what is written to the project folder is different.
- Please note that projects you do not reopen are not cleaned. If you have
  project folders that were delivered to a client, committed to a git
  repository, or archived, we strongly recommend opening them in RenderSmith
  once, or removing the credential fields under notification.targets in
  .rendersmith/config.json by hand.
- Scope: this stops the credentials from being copied into project folders. It
  does not change how they are stored in your user folder, where they remain in
  plain text as before.

RenderSmith v1.0.3

- New: Relink pre-renders without re-rendering. If a pre-rendered [PR] layer
  loses its link to the rendered file -- most often after an Undo unwinds the
  auto-link -- the PreRender list now shows a "Relink" button that reconnects it
  to the existing output already on disk. No re-render needed.
- Fix: Batch Easy PreRender now reports auto-link failures instead of marking
  them as success. A pre-render that rendered but could not be placed back into
  the comp now shows a clear warning and a red history entry.
- Email notifications now verify the mail server's TLS certificate by default,
  which is more secure. If you use a custom SMTP server with a self-signed
  certificate, turn on "Allow self-signed certificates" under Custom SMTP.
  Existing setups are unaffected -- your current behavior is preserved.
- Internal: removed unused placeholder-icon files from the extension package.

RenderSmith v1.0.2

- Fix: re-rendering a duplicated composition "from original" no longer drops
  nested pre-rendered [PR] layers from the output. Only the comp's own
  pre-render layer is rebuilt; nested pre-rendered building blocks stay intact.
- More resilient project save during render: a transient save-result hiccup
  is now retried instead of aborting the render.

RenderSmith v1.0.1

- Quality Guard now also protects Easy Proxy and Easy PreRender: when a
  render-incompatible plugin (e.g. Element 3D) is detected in the work area,
  that comp automatically switches to AE's internal renderer for accurate output.
- Lightweight buttons now stack vertically on narrow panel widths.
- Clearer Quality Guard risk-warning messages.
- macOS: added a one-time setup note for the aerendercore Accessibility
  permission (see manual / product page FAQ).

RenderSmith v1.0.0 — Initial Release

- Easy Proxy: One-click proxy generation with background rendering
- Easy PreRender: One-click pre-render with background rendering
- Ghost Mode: Mute heavy layers, auto-restore on Final Render
- Final Render: Background rendering with auto-versioning
- Multi Notification: Sound, Gmail, Discord, Slack, Telegram, Custom SMTP
- SafeMode + Quality Guard: Render risk detection (Element 3D quality protection + AE 2026 compressed-frames health check)
- Auto Backup: Automatic backup on every render
- Shield > Hang Detection: Configurable aerender hang timeout
    - Default raised from 30 minutes to 8 hours after internal testing on a
      30-min tutorial render exposed the 30-min default as too aggressive
      for heavy single frames
    - Adjustable from the Shield Settings UI (30m / 1h / 2h / 4h / 8h / 12h
      / 24h / Disabled), no manual config.json editing required
